SOHC.co.uk Forums > Project Board

cb 500 but not to standard

<< < (7/9) > >>

gary123:
I had a little ride up to Graham and Julies place today, got a nice cup of tea and stole some some rare parts, thanks mate.
Also had a look at the number plate mounts on their mongrels. Im not keen on side mounts and did not cut the back end off my bike in the hope of coming up with something.
So on the way back I had a mooch round B and Q and bought some angle brackets. I think this will work but might end up using the brackets as templates for something more substantial.
I dont think they will flex/bend but they might be a bit "bouncy. (already had the light/plate mount)                                                                                                                       
                                                                                                [ Guests cannot view attachments ] [ Guests cannot view attachments ] "

gary123:
Stupid camera was in some kind of special effects mode. Corse it could be me. [ Guests cannot view attachments ] [ Guests cannot view attachments ]

McCabe-Thiele (Ted):
Could you fit a bracket on the inside of each of the indicator bolts & attach them to the B&Q strips to improve overall rigidity?

The plate bracket seems a long way off a vertical number plate mount for some level of legality.

gary123:
Could you fit a bracket on the inside of each of the indicator bolts & attach them to the B&Q strips to improve overall rigidity?

Maybe, still working on it.                                                                             
                                                                                                                 
   The plate bracket seems a long way off a vertical number plate mount for some level of legality.

Not sure what the law is, Ill google it.

gary123:
60. Fixing of registration plate

(1) (a) Where a vehicle has been so designed that a space has been provided for the fixing

of a registration plate, the plate shall be fixed in the space so provided.

( Where a space is not provided the plate shall be fixed in the manner specified in

paragraph (2).

(2) Subject to paragraph (3), a registration plate shall be fixed vertically or, where that is not

reasonably practicable, in a position as close to the vertical as is reasonably practical at the front and

rear of every motor vehicle in such manner that the characters of the registration mark shall, at all

times, be visible from the front or the rear of the motor vehicle.                                                                   

Navigation

[0] Message Index

[#] Next page

[*] Previous page