Missing stays

[Athame57]

The hook shaped harness stay below the steering head (arrowed in image) is missing on my bike and given that I can't find it on CMSL diagrams I guess it isn't a separate part but a thing that was welded to the frame from the start as is the much smaller one a bit further back, the latter snapped off by my own hand (ham-fistedness )
I'm now considering having replacements cut and welded on, but is it worth the trouble? Opinions?

[Deano400]

It bolts on.

https://www.cmsnl.com/products/clip-d-harness_32123375000/

[Athame57]

Thanks for this Deano, I didn't spot on their diagram. I see it isn't available, must try Steve at 400Four bits or wait my chance.

[Oddjob]

Just make one. A small sheet of 1mm alloy and cut to shape, cover the end in self adhesive shrink wrap.

[Athame57]

Just make one. A small sheet of 1mm alloy and cut to shape, cover the end in self adhesive shrink wrap.

I may do that for the small stay. Meanwhile it turns out that gold mine for extinct bits called 400Four bits has one, so I've ordered it!