550 k0 1974 tool tray /filter inlet .ignition holder bracket.

[Mark sharman]

Hi All
Just wondering if anybody has any of the above mention bits hidden away and looking for a new home.
these were missing from my bike when I bought it.
I may have to fabricate a bracket if not. I did see some one on eBay selling a copy but he was in Brazil (not so sure about that).
any help would be well rewarded.
TIA   

[Bryanj]

Not clear wether you want the plastic bits or the brackets

[Mark sharman]

need the plastic tool tray which is also the filter lid which also has the wire mesh and rubber oblong seal.
also the bracket that holds the ignition switch , which is under the tank on the left hand side bolted to the down tube of the frame.

[Bryanj]

Both of those are rocking horse poo and if you find them will cost

[McCabe-Thiele (Ted)]

It's the sot of thing Ken might have in his loft?

[DomP]

need the plastic tool tray which is also the filter lid which also has the wire mesh and rubber oblong seal.
also the bracket that holds the ignition switch , which is under the tank on the left hand side bolted to the down tube of the frame.

Roo may have the tool tray/filter lid

[Laverdaroo]

I’ve got the lid and the oblong rubber and mesh holder and more than likely the fuse holder too…… I know of a site in the US that has the key barrel holders on a row of bikes I took mine from


Sent from my iPhone using Tapatalk

[Mark sharman]

Laverdaroo
That would be great if you have .let me know price and postage etc.do you require my email address?

[Laverdaroo]

Bung me a pm with your email and phone number and if you’re on wattsapp and I’ll pop you some piccies over.

Cheers and bestest regards

Roo


Sent from my iPhone using Tapatalk