SOHC.co.uk Forums > CB350/400

Rear light and indicators wiring.

<< < (3/3)

Bryanj:
Connect to brown wire in headlamp shell BUT look at 7amp tail fuse first

Dolomite_:

--- Quote from: Bryanj on June 25, 2024, 02:41:15 PM ---Connect to brown wire in headlamp shell BUT look at 7amp tail fuse first

--- End quote ---

There doesn't seem to be any power coming to the brown wire. It looks like the tail light holder grounds itself. One pin on the bulb holder shows voltage when the brake is pulled and the other doesn't show anything.

None of the fuses look blown and I checked the voltage over them but none of them registered much which is odd.

Are the 1st and last fuse spares? Then is the order tail light, headlight, main?

McCabe-Thiele (Ted):
I would start looking at the headlamp & switch end where the power comes from.

Deano400:
“None of the fuses look blown and I checked the voltage over them but none of them registered much which is odd”.

You need to check the voltage either side of each fuse to earth or remove the fuse and check for continuity.

“Are the 1st and last fuse spares”?

Yes, 1st 7A Spare, last 15A spare.

“Then is the order tail light, headlight, main”?

Yes, that is the correct order for 2nd, 3rd and 4th from top going down.

Is the small separate bulb in the headlamp on as it works with the taillight?

Navigation

[0] Message Index

[*] Previous page