SOHC.co.uk Forums > CB350/400

Rear light and indicators wiring.

<< < (2/3) > >>

Laverda Dave:
This is what I made up for a new earth tang, I cut down a 10mm stainless bolt and machines the head down. I used an old picture hook to make a new tang and used a 10mm tap to thread the indicator mounting stalk. The electrex world earth spade connector fitted to the new tang.
https://www.sohc.co.uk/index.php?action=dlattach;topic=29537.0;attach=83565;image

Laverda Dave:
https://www.sohc.co.uk/index.php?action=dlattach;topic=29537.0;attach=83567;image

Laverda Dave:
Apologies, it was an 8mm bolt I used. There's just enough meat on the indicator stalk to cut a 8mm thread.

McCabe-Thiele (Ted):
I used the Eletrexworld loom on my 400 - all the right colours with a few spare wires for other market versions. The rear light should also work in the park position as well as with main & dip.

Is your bike a UK model as the US one I suspect is bigger plus the rear number plate bracket might be different. Prety sure you can find one on ebay.

Dolomite_:
Its a UK bike.

The rear brake light operates fine, only comes on when the front or rear brake is applied. Just need to figure out a temporary fix to get the running light on the rear working. Then eventually get a replacement housing.

Laverda Dave, the rear indicators I got have a power and an earth wire, I'll probably just route them to the longer earth wires that connect to the tang.

Navigation

[0] Message Index

[#] Next page

[*] Previous page