SOHC.co.uk Forums > CB750

Wiring harness connection to battery tray (with pics)

<< < (5/8) > >>

Mike_Berkshire:

--- Quote from: BigAl (Alan) on August 14, 2024, 07:01:43 PM ---No problem, the CB750 (K3,K4,K5) & CB550 (K0,K1) share the same 5-wire safety switch...the CB550 (K2,K3) have the 2-wire safety switch

--- End quote ---

Thanks Alan, is the safety switch the red rotary switch on the right handlebar?

McCabe-Thiele (Ted):

--- Quote from: Yuppie_88 (Luke) on August 12, 2024, 08:56:48 PM ---
--- Quote from: McCabe-Thiele (Ted) on August 12, 2024, 08:33:42 PM ---Kojaycat do the block connectors.

--- End quote ---

Brilliant, I'm assuming it's the 3.9mm Japanese bullets?

https://kojaycat.co.uk/epages/950000457.sf/en_GB/?ObjectPath=/Shops/950000457/Categories/Connectors_Bullet/39mm_Japanese_Bullet_Connectors

--- End quote ---

My 400 has 3.5 mm Japanese Bullets I think my 500 is the same - I have no idea about the 750 ones.

Bryanj:
No the red switch cuts power to the coils, the safety circuit stops the starter working

andy120t:
Just for clarity,......stops the starter working....when side stand is down or bike is in gear ( I assume it's the same on this bike as on mine).

BigAl (Alan):
I don't think the the CB750 (K3,K4,K5) & CB550 (K0.K1) had a side stand switch? They do both have the 6-way red connector fitted within the harness for the 5 -wire safety switch...just for reference the plug-in safety switch part No. is 31800-341-701...possibly not available, but it can be by-passed.

Navigation

[0] Message Index

[#] Next page

[*] Previous page