Bullet connectors?

[Mikep328]

I'm un-doing some strange wiring that the previous owner did on my
'76 400 and need a few of the correct size bullet connectors.  Is there supplier here in the UK?

[McCabe-Thiele (Ted)]

They are on e bay if you search for the size plus Kojaycat sell them.
I can't remeber the diameter I'll check one of my spares with my calipers to check the size.

They are 3.5 mm or thereabouts you can buy a box set that contains male, female & the insulation covers for M & F.
I belive some Honda models used 3.9 mm mine iirc were 3.5 mm.

Like these - mine were brass ones.https://www.ebay.co.uk/itm/152873651204?_nkw=vintage+honda+3.5+mm+bullet+connectors&itmmeta=01J6MCVPBMYSYV3NAZDWA2AJ06&hash=item2397facc04:g:uzAAAOSwx9ZavIqw&itmprp=enc%3AAQAJAAAA4HoV3kP08IDx%2BKZ9MfhVJKmJsMtXGvKCCgkd1Iqg9NWUAPrsvukLV%2FqqMK5AJpFPm%2FxGRfFEp23yvYyPSqIpOKU3xEvdTDCLjBq3cjE6dcoa2mhz6Z22lsBstpec1WGRn37BLsSMjMS%2BWq3bhzbTEO16Ma0Kj09z3K7xYBFSGpr5Kx%2FmxCdiXZRGiKqpZ2ZGWjVV3ffH9%2FAJRtnONyYfTYsTtEpdxvJhw6A%2FDUu5aMkFXP7E0nUHhs5CifeBmnllkAgDE9rHwHfIEJIndoNT5LjUX1YJRqxeF6%2BWEEZFVjNn%7Ctkp%3ABk9SR_Tl7oy1ZA

[Deano400]

Link to Kojacat that Ted is referring to.

https://kojaycat.co.uk/epages/950000457.sf/en_GB/?ObjectPath=/Shops/950000457/Categories/Connectors_Bullet/3.5mm_Japanese_Bullet_Connectors

[SteveW]

Vehicle wiring products

[Mikep328]

Thanks guys, ordered the connectors from Kojacat! 

[ST1100]

Link to Kojacat that Ted is referring to.

https://kojaycat.co.uk/epages/950000457.sf/en_GB/?ObjectPath=/Shops/950000457/Categories/Connectors_Bullet/3.5mm_Japanese_Bullet_Connectors

How is the material quality of those?
Got some bullet connectors (single and twin) here that seem made of rather thin brass sheets, hence don't latch very strong and can be pulled apart rather easy (especially compared to the OEM Honda ones...)

[BigAl (Alan)]

I much prefer the bullet connectors from Vehicle Wiring Products... 3.9mm as top image. Solid material with a none shiny finish...gives a very secure fitting to the sockets.
The 'tinny' type bullets...3.5mm as lower image are slightly shorter and provide less crimping space for the wire/insulation termination.

[McCabe-Thiele (Ted)]

FWIW when I fitted new connectors I used solder after crimping them.
I found using 3.9 connectors do not fit as they should if the switches or whatever are 3.5 m so I used 3.5 mm to match.
Yes you can switch them over if you want so they are all 3.9mm connectors.