Other Stuff > Tricks & Tips

Ultrasonic Cleaning method

(1/3) > >>

Laverda Dave:
I stumbled across this on YouTube.
I need to clean the carbs of the NC30 and I'll give this method a try although I'll first use the Allendale cleaner in a jar and will then try the petrol in a jar method.
The big upside is you don't have to heat the water in the cleaner.
https://youtu.be/BTN7-C72eHA?si=lR-rb7YlLWDy2yVw

exvalvesetdabbler:
Yes that's how I used mine.  A glass container works better than plastic.  If it's only small pieces you can float the container half full of whatever cleaner takes your fancy. Those foil recepticals  that pies come in are quite handy so long as there not perforated.

Do be carefull of volatile solvents though, if I'm using paraffin or white spirit, I do it outside.

Regards
Dave.

neat street:
very good idea, I have only ever used water and cleaning solution, so this is a must to try. thanks for sharing :-)

ST1100:
Used the jars (glass with metal lid) of Darbo Minis in a similar way...
Filled with carb cleaner, threw the brass in, lid on, sunk it in the (already heated) ultrasonic...

McCabe-Thiele (Ted):
On brassware I have found white vinegar works well.
(Jar in the Ultrasound Bath)

Navigation

[0] Message Index

[#] Next page