Other Stuff > Tricks & Tips

Ultrasonic Cleaning method

<< < (3/3)

neat street:
I done mine for 10 mins, worked well

Sesman:
I used Allendales solution 4:1 mix at 60 deg for 15 minutes, but this didn’t touch the partially blocked pilot jets. I eventually heated the pilot jets in a gas flame and cleared the internal ash with a piano wire that slid easily through the jet.

The real problem I faced were blocked pathways in the carb bodies.Multiple attempts in the ultrasonic just didn’t do the job. In the end I used multiple cans of STP carb cleaner forced through the fuel routes directed by blocking each of the routes in turn.

Navigation

[0] Message Index

[*] Previous page