SOHC.co.uk Forums > CB350/400
OOps, always worrying!
Otis:
--- Quote from: exvalvesetdabbler on August 20, 2026, 05:17:08 PM ---There's two like that that holds the voltage regulator to the battery box
--- End quote ---
I will double check that because I did remove the regulator; thanks
exvalvesetdabbler:
The hole in the bottom of the air filter housing is for a self tapping Phillips screw that holds the plastic oil separator from the crankcase breather.
The only other mounting for the battery box is under the battery but that is a captive bolt on the engine mounting bracket so only takes a nut and washer.
It's got me stumped.
Regards
Dave
Athame57:
Are you sure this bolt didn't come out of your pocket at some point, that would be me all over! ;D
McCabe-Thiele (Ted):
--- Quote from: exvalvesetdabbler on August 20, 2026, 05:32:52 PM ---
The only other mounting for the battery box is under the battery but that is a captive bolt on the engine mounting bracket so only takes a nut and washer.
Regards
Dave
--- End quote ---
Could that captive bolt have been changed to a nut & bolt for ease of removal in the past?
Do you have a spare nut as well?
Otis:
I can't believe how much of your kind and helpful time I have taken from you very generous gentlemen.
These forums are just fantastic and so often it is the simplest of tips and ideas that produce results. You have all been incredibly helpful but this will perhaps have to remain a mystery for the time being. I would love to admit that this bolt was just lurking in my pocket but sadly not. It also doesn't have an associated nut. The regulator is only held with a single nut but remains robust in its position.
When something drops off or fails I promise to eat humble pie and advise you of my findings.
Thank you all.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version