Other Stuff > Desperately Seeking!!
400/4 engine bars
Oddjob:
Considering a new chrome cover is the best part of £60 the CMS price is quite reasonable. Even NOS ones can show some damage, mainly to the lacquer finish. I polished mine.
Coppertop1234:
And these are a straight fit ted?
McCabe-Thiele (Ted):
--- Quote from: Coppertop1234 on September 12, 2026, 01:29:05 PM ---And these are a straight fit ted?
--- End quote ---
Yes, Ken put me onto them.
Can't remember, I might have used longer fitting screws
Plus a gasket as the round ring has no recess.
Oddjob:
Different bolts needed. Use the 8mm headed bolts Honda used on the 650 is my advice. Don’t think Honda used a gasket on the 650 but the cork one out of the chrome cover should fit if you feel the need to fit one.
Coppertop1234:
Thanks to Dave Engine Bars - all Fitted
I took care to make sure the bolts did not touch the engine casing by filing 2 mm off both bolt and also nut so there is still a gap to casings
They will look better when out and about on pics
here is a few from in the garage
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version