SOHC.co.uk Forums > CB500/550

CB550 Neutral Switch

<< < (2/3) > >>

Bryanj:
Message Nurse Julie, Trigger did have some contacts etched out years ago and may have some left, you have the screw the wrong way round in the rotor and the tab is important as it locates the rotor to the selector drum.
I may have a spare rotor but not the stator, i sold my las nos one years ago.
They are the same on 500 four

McCabe-Thiele (Ted):
I bought a good used one from Roo, iirc it had been refurbished.

p/n 35752-323-000 neutral switch.

Not sure if CSML list them?

Oddjob:
I have an idea on how to fix a broken lug off the rotor and also an idea of how to fix a broken contact plate off the switch. Give me a few days to find some broken ones and I’ll post a video on how to do them.

Johnny4428:
I’ve repaired a couple of contact plates by soldering on a copper rivet head. Seems to work OK.

Oddjob:
Got to have some left of the plate after the bend for that to be a solution Johnny I’d imagine. I’m looking at replacing the entire plate.

Navigation

[0] Message Index

[#] Next page

[*] Previous page