« previous next »
Pages: [1]   Go Down

Author Topic: Hello All!  (Read 5624 times)

Offline ste131

  • Newbie
  • Posts: 16
    • View Profile
Hello All!
« on: December 15, 2011, 09:36:13 PM »
Hi all!
Finally after 30 years I have managed to buy myself a CB650z 1981  :D
 MOT tomorrow, fingers crossed..!
Bike is in really good condition with only 7500miles! Been dry stored for many years. Only downside is a 4 into 1 exhaust and a bit of rust on the tank lip.
All tips, knowledge about these bikes would be much appreciated..!
Many thanks,
Steve

 
Logged

Offline K2-K6

  • Grogu
  • *
  • Posts: 6044
    • View Profile
Re: Hello All!
« Reply #1 on: December 17, 2011, 10:02:51 PM »
Hello and welcome to the forum.

Hope the MOT went well, or had easy fixes only.

Bit cold to be out and about this time of year, rode mine out today and couldn't really tell just how slippery it was then it started sleating so guessed it was quite close to ice.
Logged

Offline UK Pete

  • SOHC Jedi
  • Posts: 2696
    • View Profile
Re: Hello All!
« Reply #2 on: December 18, 2011, 08:57:22 AM »
Welcome to the site Steve, 7.500 miles is only just run in sounds like a good one, if you get the chance load up a picture of your bike to the site , it gets a lot more intetest with pictures
Pete
Logged

Offline ste131

  • Newbie
  • Posts: 16
    • View Profile
Re: Hello All!
« Reply #3 on: December 18, 2011, 06:30:57 PM »
Thanks for the replies! Sailed through MOT. Time to do some work on her now!
Hope the pictures upload this time!
Logged

Offline ste131

  • Newbie
  • Posts: 16
    • View Profile
Re: Hello All!
« Reply #4 on: December 18, 2011, 06:32:46 PM »
It worked!!!
Logged

Offline UK Pete

  • SOHC Jedi
  • Posts: 2696
    • View Profile
Re: Hello All!
« Reply #5 on: December 18, 2011, 06:43:37 PM »
very nice, even the comstars still look clean
Pete
Logged

Offline ste131

  • Newbie
  • Posts: 16
    • View Profile
Re: Hello All!
« Reply #6 on: December 18, 2011, 07:01:09 PM »
The wheels are in fab condition! Just spent two days polishing the engine covers. The main casings are quite corroded and will need a refinish which I will do when I completely strip her and get the frame sorted. Just trying to locate one igniter. Bike runs fine (apart from over fueling) but all the black stuff has melted away! Common problem? Main fuse has been replaced with a nail. Apart from that no issues... Fingers crossed!
Logged

Offline Tomb

  • SOHC Pro
  • Posts: 658
    • View Profile
Re: Hello All!
« Reply #7 on: December 19, 2011, 07:23:29 AM »
That looks nice Ste. My brother bought one brand new back in the day.

You can buy potting stuff (for want of the right word :-\) to re-pot the ignitor, don't ask me where, my brother looked into it. If your ignitor is still working I'd go that route.
Logged
Tom
'73 CB550 with CB500 engine café racer
'62 CB77 Sprinter
'70 CD175
'78 CB550 with sidecar
'80 Z50R
And a load of old Yamaha 1100's

Offline Tomb

  • SOHC Pro
  • Posts: 658
    • View Profile
Re: Hello All!
« Reply #8 on: December 19, 2011, 07:35:17 AM »
Had a quick nosey around and came up with a bit of potting info Clicky

If it was me, I'd just top it back up with GRP type resin
Logged
Tom
'73 CB550 with CB500 engine café racer
'62 CB77 Sprinter
'70 CD175
'78 CB550 with sidecar
'80 Z50R
And a load of old Yamaha 1100's

Offline ste131

  • Newbie
  • Posts: 16
    • View Profile
Re: Hello All!
« Reply #9 on: December 19, 2011, 08:18:24 PM »
Thanks Tomb. I will look into getting it done! Looked for a set of second hand ones but think they were off a CB900. Didn't say OKI MPS-200 on them so didnt buy.
Logged
Pages: [1]   Go Up
« previous next »