SOHC.co.uk Forums > CB750
Spare Engine Rebuild.
Voxonda:
I dont think Yoshimura produced specific F2 pistons, if my memory serves me right.
mick:
Cheers HairyGit & Rob, the only markings on the crown of the pistons are A & E, i'll look into it further and see if i can find any more info, cheers Mick.
UK Pete:
I am pretty sure they did a yoshi kit for the f2 , your probably in luck and have it,
i have to say you will have all sorts of problems, so save yourself the agro and sell it all to me LOL!
Check out the US site, there was a post on using a f2 top end on a k or f1 engine, i seem to remeber that the oil galleries at the bottom of the f2 barrels might have to be slightly machined to match, i found this post and it shows you the difference at the base of the barrels http://forums.sohc4.net/index.php?topic=99165, if you search a bit more honda man has a post on the subject, and a guy called yoshi on this forum had a yoshi kit on his f2 some years back, search the user name yoshi on hear and take a look through his posts
pete
SteveD CB500K0:
Yoshi823 (also named Pete) hasn't been around for a while. He's in SE London. I think I have his number somewhere if you can't contact him via the PM system.
Steve
mick:
Thanks for all the suggestions and help ;), after a bit more detective work on the US site it would appear that i have either K series barrels or F1 not sure which yet?,
i found a photo from Terry in Oz which shows a f2 & k2 barrels side by side,
first pic Terrys
my barrels
my barrels look the same as the k2 barrels but i'l have to try and find a photo of some f1 barrels to compare :-\, cheers Mick.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version