« previous next »
Pages: [1]   Go Down

Author Topic: 750F1 axle holder  (Read 3202 times)

Offline kifer

  • SOHC Member
  • Posts: 172
    • View Profile
750F1 axle holder
« on: March 27, 2012, 05:22:27 PM »
The axle holder [ clamp ] is marked with the letter F on my F1, Dose this mean anything ? can they be fitted either way around.
Cheers in advance.
Logged

Offline Spitfire

  • SOHC Master
  • Posts: 1940
    • View Profile
Re: 750F1 axle holder
« Reply #1 on: March 27, 2012, 05:43:38 PM »
The clamps are "stepped", the F mark should be at the front, the gap at the back, tighten up the front bolt first then the back one.

Cheers

Den
« Last Edit: March 27, 2012, 06:28:08 PM by Spitfire »
Logged
1976 CB750F

1977 CB750F2 In bits

1964 BSA A65R In bits

Offline kifer

  • SOHC Member
  • Posts: 172
    • View Profile
Re: 750F1 axle holder
« Reply #2 on: March 27, 2012, 07:15:33 PM »
Thanks for that, Old age is catching up remember now step at back to form the clamp,  Maybe bike should go I could buy some lego
Logged
Pages: [1]   Go Up
« previous next »