750 F2 lower engine bolt ?

[bluemouse1006]

 
Hi I'm in the process of fitting a rear disc etc on my K5 ive found that the bottom engine bolt , The one  that runs through the front foot pegs is too short the one I have any one have a F 2 bottom engine bolt hanging about I'll pay including postage

Thanks

Amos 

[Bryanj]

Whats wrong with a length of stainless studding and a nut on each end?

[bluemouse1006]

That's how mine is already but not long enough I wasn't aware you can buy such a thing I'll have a word at my local nut and bolt people ..

Thanks again

Amos 

[archmill]

Bluemouse, just noticed your posting. Still need an F2 engine bolt? I have one you can have for the price of the postage mate.

Archmill

[bluemouse1006]

Still need one thanks let me know what the cost and I'll pay via PayPal or how ever u want I'll send u my address as well

Thanks again

Amos

[archmill]

Amos, will hunt it out tomorrow.

Archie

[bluemouse1006]

Archie

your a star my address is 37 HU129PJ, surname Goldsmith

thanks again for your help

Amos

[archmill]

Amos, looked out the engine bolts. The long bolt that is the rear lower engine bolt that also bolts on the footrest bracket is M12 x 430mm threaded both ends. Is this the one you need?
The other two engine bolts are M10 x 280 and M10 x 316.

Archmill

[bluemouse1006]

This is the one the long one that goes through the bracket and the foot pegs bolt to

Cheers

Amos

[stewonepot]

hi amos,
I have a brand new bolt that I got from a firm in somerset for £10 that you are welcome to.The problem is the postage as I live in southern spain let me know if this helps or not.
stewonepot.

[bluemouse1006]

Stone pot

Thanks for the kind offer ill keep you in mind

Amos

[stewonepot]

amos,
No probs, good luck with the build.
stewonepot

[archmill]

Amos, I have checked the part numbers for both the K5 and F2 bolt and they are totally different. I would go for stewonepot's offer as I guarantee the F2 won't fit ( otherwise the part number would be the same )

Archmill

[bluemouse1006]

Hi

Im changing the full rear set up tor a F2 with the large alloy frames etc that the bolt goes through so yours should be ok i think ?
any news on the wheel ?

Thanks

Amos

[stewonepot]

hi amos,
i'm abit grogy from last night's olympic drink up, but if you are going for the full f2 foot peg set up I have the lot. It comes from an extra frame that I have here from a germany f2. It includes the rear master cylinder( which needs new seals) as I said before not needed now so small££ and cover the postage
kind regards Stew