SOHC.co.uk Forums > CB750
HM341's on a k1
mick:
Hi Mick i would leave the exhaust as they are it would be a shame to butcher them :-\,
love the colour of your bike is it valley green? also like the brier brown to ;) cheers Mick.
Green1:
Hi Mick
The bike is Valley Green.I never new they did it in green so just had to have it. I've just sold the 250 :'( to pay for the new pipes :)
Seamus:
Why did you buy HM341's for a K1? Are the 300's no longer available?
BigAl (Alan):
mmmm! I know DS are selling a pattern HM341 exhaust as well as the Honda HM341. But why buy these Rather than HM300's? Anyhow from experience of both exhausts the bike will run, you may need to re-jet for a better performance. But as for removing the baffles from the HM341 you would need to drill out the 5No baffles...follow the 5No spot welds on the outside of the exhaust for there location...long metal hole cutter required...???
Good luck
Alan
Green1:
You can't get get HM300's from David Silvers any more and they only have three genuine HM341's left.They are trying to find someone to make pattern 300's.I emailed some dealers in america and they are running low a full set of pipes imported to the UK comes to $4000 :o.I'm sure I read somewhere that you just drill half a dozen 15mm holes in the end of the baffles and cut the back off the diffusers to make the hole bigger.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version