SOHC.co.uk Forums > CB750

750f1 carbs

<< < (3/3)

Waggles:
On my F1 I struggled a bit with new rubbers but hit on a good technique, I put rubbers on the head first, smeared a little washing up liquid ( only the teeniest tinest ikkle bit ) in the openings offered up the carbs and then tied them in position with a piece of rope going around the motor. I then used a bar to tighten this torniquet - like to put pressure on. Now the carbs didn't go on just using this but you can wedge the torniquet bar so the pressure is still on and that gives you your hands free to lever them the last little bit.

You could also use a ratchet strap but I am too tight to buy one just for that!

Navigation

[0] Message Index

[*] Previous page