Other Stuff > Tricks & Tips

Engine Removal / Intallation Easy Method

(1/2) > >>

Ewan 500 K1:
This is installing the engine on a CB500/4 , removal is just the reverse procedure. Same procedure can be used on the 400, 650 and 750

1. Remove sump, oil strainer, oil filter housing, breather cover and exhaust studs from the engine (photo 1)

2. Sit the engine on its side , kickstart side down . This is imporatnt it doesn't work as well if the engine is the other way up. (photo 2)

3. Lower the frame over the engine and install the two lower engine bolts (photos 2 & 3)

4. Have some blocks of wood in place to roll the frame / engine aassembly onto in upright position. The wooden blocks should be positioned to avoid the side stand bracket (photos 4 & 5)

You might want to protect the frame's paintwork by wrapping it in bubble wrap or similar before you start

Ewan 500 K1:
seems to be a fault on the forum thats causing pictures to not appear just now !

AndyH:
....and 3.5yrs later, still no pics.   I, for one, would be interested in seeing the pics in all their naked glory!  ;D

Nurse Julie:
There are quite a few vid's on Youtube showing how (and how not!!) to remove engine by laying bike on it's side. Probably find more under CB750 than 500/550's

mike the bike:
Too much like hard work, lifting a bike up like its fallen over.  I'll stick to my way

Navigation

[0] Message Index

[#] Next page