« previous next »
Pages: [1]   Go Down

Author Topic: CB500 Camfshaft Tolerances - error in manual ?  (Read 4131 times)

Offline Ewan 500 K1

  • SOHC Pro
  • Posts: 511
  • jings crivens help ma boab
    • View Profile
    • Adams Bros Probe 2001
CB500 Camfshaft Tolerances - error in manual ?
« on: January 04, 2014, 12:06:04 PM »
Hi

anyone know the correct figures for the 500's camshaft lobe tolerances. The shop manual (and Haynes and Clymer) all state that the standard height for the inlet lobe is 34.93mm to 34.97mm  and that the serviceable limit is 35.85mm ... ie that the service limit is bigger than the standard height ... some mishtake surely ??

[ Guests cannot view attachments ]
« Last Edit: January 04, 2014, 12:08:20 PM by Ewan 500 K1 »
Logged
jings crivens help ma boab

500K1/550K3 mongrel cafe racer project for now at http://www.sohc.co.uk/index.php/topic,4120.0.html

500K1 basket case for later

Offline Piki

  • SOHC Expert
  • Posts: 446
    • View Profile
Re: CB500 Camfshaft Tolerances - error in manual ?
« Reply #1 on: January 04, 2014, 12:36:12 PM »
That is wrong, there is a mistake, the correct service limit of the inlet cam is 34,85mm.
Logged

Offline Ewan 500 K1

  • SOHC Pro
  • Posts: 511
  • jings crivens help ma boab
    • View Profile
    • Adams Bros Probe 2001
Re: CB500 Camfshaft Tolerances - error in manual ?
« Reply #2 on: January 04, 2014, 01:13:02 PM »
cheers Piki  :)
Logged
jings crivens help ma boab

500K1/550K3 mongrel cafe racer project for now at http://www.sohc.co.uk/index.php/topic,4120.0.html

500K1 basket case for later
Pages: [1]   Go Up
« previous next »