SOHC.co.uk Forums > CB750

750 k6 exhaust/ foot rest bolts

<< < (3/4) > >>

Bitsa (Ralph Wright - RIP):
Billy
As its still pissing down I will undo 1 of mine and post the measurements.I know they are not cheap but as I always say buy honda, fitting no PROBLEM
Cheers
Bitsa

billy192:
bitsa your soooo good

Bitsa (Ralph Wright - RIP):
Billy,
Is this of help to you?
146mm long
12mm across
and as I have no calipers I ran a piece of wire around it and the circumference is 52mm round
Bolt head 17mm
Nut 19mm spanner size
Cheers
Bitsa

Bitsa (Ralph Wright - RIP):
What I forgot to mention only the threaded part goes through the frame hanger.So If you are trying to make one you will have to get the thread part down to 10mm.
Cheers
Bitsa

billy192:
Bitsa,
wonce again to the rescue. thanks for the effort mate.
its exaactly what i need. 8)

and yes i will post som pics of the bolts in action
Thanks
Billy

Navigation

[0] Message Index

[#] Next page

[*] Previous page