ooops!

[ka-ja]

Hi all,
         The new exhaust has spent two years residing on top of a wardrobe, the time has come to unwrap and fit------oh sh*t.

[LesterPiglet]

What type is it?

[Clem2112]

Looks like a BSK (Dutch maker I think) that I once had....

Are those headers fitted to the correct exhaust ports ??

[ka-ja]

Hi,
     It's a Marshall Deeptone (Dutch) and the pipes are in the correct exhaust ports 1-1,2-2 etc., if you could see it, the pipes cannot go anywhere else and line up parallel, just a 50-60 mm gap between the two"pairs"---ken

[Clem2112]

*************   APRIL 1ST **********************



 

[ka-ja]

hi Clem2112,
                         It may have been April the first, but it was an expensive one----£300 for a piece of scrap!!!!!!!!!!!!!

[Green1]

It's not to bad I bet there is a custom exhaust firm out there that can make a couple new headers.
Not ideal I know but still salvageable.
 

[Bryanj]

Have you tried putting number 1 at the other end and working from that?

[ka-ja]

Hi all,
           Perseverance has given a possible contact at the makers, two new pipes a strong possibility-----Ken

[ka-ja]

Hi all,
            Update, the spare pipes arrived and with some hacksaw use I ended up with this end result.
            A word of warning, anyone thinking of dealing with Raw Power Motorcycles, if things go wrong, you will be totally ignored once they realise you have a problem, despite my friendly first approach for help and saying I was willing to pay for said help!