Top yoke replacement

[El__burro]

I am just looking at my new project (CB750 K2) and putting together a parts wish list.
I'll need some valve caps (the bolts that cover the valve)
I need also a top yoke, mine has a crack at the tightening bolt.
for sure I don't want to buy a similar one (with the rhino horn).
What other models do adapt to this model (even not Honda).

Thanks
El__burro

[MarkCR750]

EB, David Silver sells tappet caps and Honda CBX1000 Yokes are a straight swap, cheers Mark.

https://www.davidsilverspares.co.uk/CB750K2-FOUR-1972/part_105133/

[El__burro]

Thanks Mark.
I am actually bidding on a 1978 CB750 F2 yoke,
will that fit?

Thanks
El__burro

[MarkCR750]

I don't know EB , hopefully someone else on the forum will.

[El__burro]

I'll let you know soon.
I paid £16 (incl P&P)
It's worth giving it a go.

Thanks
El__burro

[Bryanj]

I thought that the F2 had bigger diameter fork tubes

[UK Pete]

I thought that the F2 had bigger diameter fork tubes

They are 35mm so should be the same dim
pete

[El__burro]

EB, David Silver sells tappet caps and Honda CBX1000 Yokes are a straight swap, cheers Mark.

https://www.davidsilverspares.co.uk/CB750K2-FOUR-1972/part_105133/

Mark, is it just cbx1000 or also 750/500 models.

Thanks

[Bitsa (Ralph Wright - RIP)]

If you have the k2 clocks they will not fit on to nothing else except the rhino yoke hope you have considered this
Cheers
Bitsa

[El__burro]

My intention is to "shave off" the raisers as I have clip ons and the speedo mounted on the headlight.
The cbx one will be great as it will save me the shaving bit.
Regards

[El__burro]

EB, David Silver sells tappet caps and Honda CBX1000 Yokes are a straight swap, cheers Mark.

https://www.davidsilverspares.co.uk/CB750K2-FOUR-1972/part_105133/

Mark, I bought a Honda Cbx1000 top yoke. It's not a straight swap.  Cbx  seems to have wider forks..

"thanks"
El__burro

[AshimotoK0]

I've got a CB750K7 top yoke ...don't know if it will fit.

Ash

[El__burro]

Ash, i guess the k7 looks like the one i have already.
Unfortunately its not great for my purpose as i cannot shave the raisers off.
It would leave 2 huge holes.

Still the CBX one is perfect apart from the fork diameter variances.
Cb750 F2 (and k2) is 35mm
CBX 1000 IS 39mm

[Bitsa (Ralph Wright - RIP)]

Hi
I have a spare top yoke.Do not know whats its off but does fit the 750 with no problem think its 500 but not sure
If interested will post photo in the morning
Cheers
Bitsa

[El__burro]

Let's see it. Thanks to both of you.
I have just realised that also the CBX1000 one is 1 cm wider.