SOHC.co.uk Forums > CB750

CR 750 brake plate

<< < (2/3) > >>

MarkCR750:
Nice work Gamma, I like the way you have mounted the cable stop on the swing arm, I bought the same GT750 cable and was going to mount the stop on the brake plate, but yours is a neat solution, if I decide to use the cable I'll probably use the swing arm as you have.

JamesH:
Agreed, nice work gamma. Polishing on that rear hub / plate looks lovely by the way...

gamma:
This set up has yet to be tried. Obviously I will have to route the cable better. And there are other problems to overcome, like the kickstart lever (which I have heated and bent) will clear the footpeg but not the brake lever. So I plane to unhook the brake cable for starting!  (yes I got rid of the electric starter)

Also took me ages to polish hubs

gamma:


The wire drives the hub, so if my hand got caught it will hopefully stop spinning



I used a file in the grooves then emery paper then solvol autosol


 ;D

gamma:
Also converted front to twin disc

Navigation

[0] Message Index

[#] Next page

[*] Previous page