SOHC.co.uk Forums > CB350/400
Fuel tubes
Bodd:
Where do the two 3.5mm x 600mm fuel tubes go to ? Numbered 4 in the top picture and 2 in the bottom picture.
[ Guests cannot view attachments ]
Drew400:
Hello Bodd,
I'm no expert, but on my basket case they simply dangled down behind the swing arm as vents, along with all the pipes from the float basins.
I will be able to locate a photo later today if required.
Cheers, D.
Lobo:
Hi Bodd,
See here...http://www.sohc.co.uk/index.php/topic,6954.msg39452.html#msg39452
Top pic... they route over the top of the air intake box & then down over the back of the gearbox casing & between the swing arm.
You've only yourself to thank as you posted said pic!
Simon
Bodd:
Cheers guys, I thought they went that way but as they are listed as "fuel" tubes I wasn't 100% sure. Another question about the part I circled in the picture below which has no part number, the part that the fuel pipe connects to is attached to a tube that rotates around the link pipe, on mine it seems very loose (rotates very freely), is that normal or is it a potential leak ?
[ Guests cannot view attachments ]
Lobo:
Hi again Bodd,
On my carb rebuild I too noted the rotation .... would never have described it as 'very loose' but 'exactly as I'd expect' given the o rings nipping it into its carb housing. Certainly it'd never rotate under its own weight + fuel tube, but rather adjust nicely to its most comfortable position & stay there.
You got the correct sized 'o' rings?
Simon
Navigation
[0] Message Index
[#] Next page
Go to full version