master cylinder

[Bitsa (Ralph Wright - RIP)]

Thanks Bryan still cant find my calipers but what I do know is the bore is the same size as the rear pillion footrest bolts are and cant measure that yet either
Cheers
Bitsa

[Trigger]

Bitsa, how can you lose a vernier? It's not like a small washer or a carb part. Have you looked under your seat

[mick]

the one on my F1 reads 1 C 3  i'll have a look at the rest this afternoon  cheers Mick.

[mick]

The one in my spares is numbered 1 S 1 and the one on my KO has no markings on ? cheers Mick.

[Bitsa (Ralph Wright - RIP)]

Thanks for looking Mick I bet all yours have the plate and tube but as usual the krauts have come up with a kit not cheap/Our bruvs over the pond have told me its a year of one type and now have the part number and that's only because I posted has the states scrapped all k7s Part number 45530-404-315 cheapeast so far 53 euros ouch when a pattern master new is 58 euros.
Trig they have probably fallen in a box somewhere and on top of that the missus has told me she has been in there so I will have to go through all the box's again
Cheers
Bitsa

[hondaking]

Have just sent you the numbers stamped under my master Cylinder and also the seal kit number. Master cyl number is 2 k 3 it has a plastic res which is the same as in the k7 parts book.

     Ron

[Bitsa (Ralph Wright - RIP)]

Thanks Ron
Bitsa

[Bitsa (Ralph Wright - RIP)]

Thanks guys for ll your views
Got prices from all over and DS is the cheapest for a repro has anybody had one and what do you think of it?
I have allways thought and still do Honda is best but when a repair kit costs more than one of these complete is way different you have to think.
Kits from USA real cheap but you gain nothing with post on top so over to you DS fans
Cheers
Bitsa

[LesterPiglet]

I've a DS repro on my 550, can't fault it.

[Johnwebley]

Thanks guys for ll your views
Got prices from all over and DS is the cheapest for a repro has anybody had one and what do you think of it?
I have allways thought and still do Honda is best but when a repair kit costs more than one of these complete is way different you have to think.
Kits from USA real cheap but you gain nothing with post on top so over to you DS fans
Cheers
Bitsa

got a DS repro with larger bore for a twin disc conversion,looks good,works great

[Bitsa (Ralph Wright - RIP)]

Hi Guys
Great thanks for the info and nice to hear from Lesterpiglet again
Cheers
Bitsa