SOHC.co.uk Forums > CB350/400

Winter Work

(1/18) > >>

hondatri:
Hi  guys I am putting my 77 400/4 on Bench for winter and need some info I want to replace Cam Chain its Tensioners and adjusters, Anyone who has done have any tips. I will be stripping Top end anyway and Barells plus and  I am going to clean Carbs, I have a Haynes Manual but its not clear enough, Any tips appreciated

hairygit:
You're going to have to split the crankcases to replace the camchain properly, they are endkless. There are some available with a spring link, but if they were any good I'm sure Honda would have used them :o

Bitsa (Ralph Wright - RIP):
Agree with hairygit if you're gonna do it do it right
Cheers
Bitsa

Trigger:
If you take it to a Honda dealer they would use a DID split link chain. That is why DID do split chains.

Bitsa (Ralph Wright - RIP):
Never did in my day as a mechanic Trig unless it already had one and if I recall right cd and cb175s did.All the step throughs did not if I remember right.
Cheers
Bitsa

Navigation

[0] Message Index

[#] Next page