« previous next »
Pages: [1]   Go Down

Author Topic: crank  (Read 6118 times)

Offline steven400/4

  • SOHC Expert
  • Posts: 313
    • View Profile
crank
« on: March 17, 2015, 04:54:32 PM »
i know no how to work out what shell you need for a crank . i was told the shells are matched to the cases aswell as the crank is this right???? i am just thinking as i have a crank with no marks on it but it has a good set of shells with it . plus i have a set of cases witch has no crank i have never put these two together. can someone tell me if the shells are match to just the crank or the cases as well???
Logged
cb400f2 x7
honda ss 50
gsx 1400

Offline tom400f

  • SOHC Pro
  • Posts: 743
    • View Profile
Re: crank
« Reply #1 on: March 17, 2015, 05:09:49 PM »
Shells are matched to crank and cases. Marks are on both as here http://www.dotheton.com/forum/index.php?topic=31541.1800

Then this chart as attached. Lots written up about it elsewhere on here I think.

Logged
1978 CB400F2 Yellow
1997 VFR750FV Lapis Blue
2010 VFR800 A9 Silver
2013 Yamaha FZ8 Grey (Son's)

Online Bryanj

  • Grogu
  • *
  • Posts: 12561
    • View Profile
Re: crank
« Reply #2 on: March 17, 2015, 05:28:24 PM »
There are always marks on the crank, just a swine to find and see
Logged

Offline steven400/4

  • SOHC Expert
  • Posts: 313
    • View Profile
Re: crank
« Reply #3 on: March 17, 2015, 05:34:50 PM »
i know how to work it out tom but thanks bryanj the marks have come off on the crank plus its been lighten,d and the holes are where the marks should be
Logged
cb400f2 x7
honda ss 50
gsx 1400

Offline mike the bike

  • SOHC Jedi
  • Posts: 2652
  • CB400F, Royal Enfield Interceptor.
    • View Profile
Re: crank
« Reply #4 on: March 17, 2015, 06:15:02 PM »
You'll need some plastigage then
Logged
Where's that 10mm socket got to?
Pages: [1]   Go Up
« previous next »