SOHC.co.uk Forums > CB750
Front Brake Callipers
Coppertop1234:
Front new master seals fitted with new braided hoses and pads
No joy the piston is seized all the way home in the recess
Tried to move it with an air line stuck solid
Present line of thought is to soak in rust release and try airline again
Failing that I would presume attacking the piston to remove and replace
Are the 400/4 front callipers the same size?
Not tried back ones yet,but expecting the same
Any tips appreciated
Cheers
Keith Snr
royhall:
Best thing to do. If you have a master cylinder, connect it to the caliper with one of your hoses. put some brake fluid in, a quick bleed, then pump the piston out with the hydraulics (you will need a handlebar or a length of tubing to enable you to squeeze the lever). Be ready with a rag to catch the fluid when the piston pops out. Works nearly every time, you wont get it out any other way without damage. O and keep you fingers out the way as it sometimes goes with a bang.
Bryanj:
If you remove the nozzle from a grease gun the hose will thread into the pipe fitting on the caliper a couple of threads DO NOT FORCE IT AS THEY ARE DIFFERENT then with bleed nipple in pump grease gun to force piston out----never failed yet
hairygit:
No, they are NOT the same as 400/4, 500/4 and 550/4. The calipers pn the F1 were also fitted to the K7 ans u,s, market automatics, so good used ones are rare and expensive, thankfully Dave Silver does an exact replica now, so all is not lost if you do damage it.
Spitfire:
The F1 front caliper used to be like rocking horse poo to find but as has been said David Silver spares now sells a replica, here is a link to a chart that I made out a while ago on interchangeability
http://www.sohc.co.uk/index.php/topic,1562.msg1650.html#msg1650
Cheers
Dennis
Navigation
[0] Message Index
[#] Next page
Go to full version