SOHC.co.uk Forums > CB750

K1 Fork Pistons

(1/3) > >>

atlsec:
 Hi Guys,
              I know this is an old subject but does anyone know where to get a K1 fork piston from as mine are missing .My bike was fitted with 6 in extended forks and with a different oil control compared to standard . Someone said a cb650 will fit ,is this true ? .  Cheers ,Alan .

AshimotoK0:
If you mean 51442-300-000 item 5 in image DS can special order them. Not sure how long it would take though

You could  make your own possibly. Mine are apart at the mo so I could measure them

Ash

[ Guests cannot view attachments ] [ Guests cannot view attachments ] [ Guests cannot view attachments ]

atlsec:
Hi Ash ,
            Thanks for the info , I was given a part No 51442 319 000  from DS but as it may turn out that I might not have K1 Forks but K3 .I am looking into this now . The sliders look the same but the stanchions are different .It is very difficult to identify parts from different years being fitted over the life of the bike .If it turns out mine are incorrect I will let you know .Thanks again , Alan .

Trigger:
K1 and early K3 have the same stanchions (apart from some USA K3 units). Put a picture so we can see what type forks you have.

atlsec:
Hi Guys ,
                I`m feeling a bit of a prat at the moment .I have found them jammed at the bottom of the sliders . I could not shift them so have taken them to a local Kawasaki  dealer for any ideas . He said the only way was to heat up the outer slider so they should drop out . I will keep you posted . Pity I had them polished first !!!!!!!!.   Alan .

Navigation

[0] Message Index

[#] Next page