SOHC.co.uk Forums > CB750

Cb750 dual disk upgrade

<< < (13/14) > >>

Spitfire:

--- Quote from: tom400f on July 02, 2015, 09:26:36 AM ---The other option you have is to use flexible hoses all the way to the caliper.

--- End quote ---
That's what I did, from HEL.


Cheers

Dennis

El__burro:
Thanks,  I was thinking to use the old bolts instead.
I see what you mean about the modifications to the bolts. (See picture)

Flexible pipes is plan B.

Thanks
El__burro

El__burro:
Here is what I have achieved so far.
Is the modification to the bolt necessary also for the connection to the hose (as well as the calliper)?
Just need to find how to hold the other side hose and then I'll complete the pipeline.
Thanks
El__burro

tom400f:
From Bryanj:

--- Quote ---if you are making your own and using original flexibles you need to modify an M10x1 flare nut or it will not seal
--- End quote ---

I read that as referring to the connection to the hose, only that, not the caliper.

El__burro:
it looks like that i am ready to move on the next step.
i have some oil dripping on the fork slider, i guess it comes from under the the gaiters.
ill start a new post for this issue but i will eventually complete this one with a long post with detailed pictures.

thanks a lot to everyone.
el__burro

Navigation

[0] Message Index

[#] Next page

[*] Previous page