SOHC.co.uk Forums > CB350/400

Horn mounting clip

(1/3) > >>

Myford:
That little chrome clip on the horn bracket is driving me potty. Can anyone explain how its meant to fit, or ideally post a picture please. The horn faces sideways, and I'd always assumed that the clip faced upwards and towards the frame to hold the throttle cables, but then I read on here somewhere that it goes the otherway round and holds the tacho cable in.
I must have spent an hour this morning pratting around with it, and I'm still none the  wiser.
Terry

Chris400F:
Terry,
Not the best picture in the world - access is limited with the tank in place - but hopefully this will give an idea of mounting.
Chris

Myford:
Chris
So the clip is on the rearmost bolt, and it's facing the spine frame tube and it's holding the throttle cables and the tacho cables against the frame. Have I got that right?
Terry

Chris400F:
Terry,
It is on the rearmost bolt. Clip keeps throttle cables and clutch cable in place, not the tacho.
This topic has a link to the dealer setup manual, page 16 shows what you are looking for:
http://www.sohc.co.uk/index.php/topic,8234.msg54250.html#msg54250
Chris

Lobo:
Hmm.. thanks guys think I've got mine mounted to the wrong bolt.  Nonetheless, basic idea here. Note tho' the tachometer cable is just never going to 'fit in'

Lobo

Navigation

[0] Message Index

[#] Next page