SOHC.co.uk Forums > CB350/400

CB400F fork leg length

<< < (2/3) > >>

Chris400F:
If you really want to know .... 1.37795", that's 1 3/8" plus about 3 thou .... bet you wish you hadn't asked.

Norniron:

--- Quote from: MikeSB6 on August 04, 2015, 07:45:07 PM ---Hello,

  wow! that was quick! Thanks for all the replies. I was planning to use CB550 yokes to take the fork legs. Now, what's 35mm in imperial?

     Cheers, MikeJ

--- End quote ---
I done the same but it wasnt a straight swap.i had to get handy with the grinder to the headstock

MikeSB6:
EEK!, what did you have to grind off?

  Cheers, MikeJ

Norniron:
I found the 550 stem on the btm yoke was shorter than the 400.i had to grind a bit off the bottom of the headstock to gain enough thread at the top.

MikeSB6:
O.K., thanks Noriron, I'll keep an eye out for that when the time comes,

    Cheers, MikeJ

Navigation

[0] Message Index

[#] Next page

[*] Previous page