« previous next »
Pages: [1]   Go Down

Author Topic: Brake fitting threads  (Read 6025 times)

Offline gtmdriver

  • SOHC Expert
  • Posts: 266
    • View Profile
Brake fitting threads
« on: September 09, 2015, 08:20:17 PM »
Can anybody tell me whether the male bake unions on the steel line connecting the lower flexible hose to the front brake caliper are the usual M10 x 1mm please?
Logged

Offline Bryanj

  • Grogu
  • *
  • Posts: 12555
    • View Profile
Re: Brake fitting threads
« Reply #1 on: September 10, 2015, 02:11:17 PM »
NO, they are the same as Honda cars BUT you may need the ones with no thread at the tip depending on the make/type of flexible and you have to machine those yourself as they aint used anywhere else
Logged

Offline gtmdriver

  • SOHC Expert
  • Posts: 266
    • View Profile
Re: Brake fitting threads
« Reply #2 on: September 10, 2015, 06:09:03 PM »
So what thread are they if they're not M10 x 1?
Logged

Offline mike the bike

  • SOHC Jedi
  • Posts: 2652
  • CB400F, Royal Enfield Interceptor.
    • View Profile
Re: Brake fitting threads
« Reply #3 on: September 10, 2015, 07:23:37 PM »
I think it's M10 x 1
Logged
Where's that 10mm socket got to?

Offline Dan

  • SOHC Associate
  • Posts: 79
    • View Profile
Re: Brake fitting threads
« Reply #4 on: September 11, 2015, 12:03:55 AM »
I ran a braided hose from the m/c to the solid brake line that's connected to the front calliper. It's M10x1.25. If you need any advice try Hel Performance, they were able to answer all my questions and I had a hose delivered the next day.
Logged
1994 GSXR750WR Endurance rep
1975 CB400F ongoing project

Offline gtmdriver

  • SOHC Expert
  • Posts: 266
    • View Profile
Re: Brake fitting threads
« Reply #5 on: September 11, 2015, 09:06:05 AM »
Thank you all.
Logged
Pages: [1]   Go Up
« previous next »