SOHC.co.uk Forums > CB350/400
To beep or not to beep
Clem2112:
Found my old grubby original with its plastic cover and the special nut to mount it.
I made up a stainless bracket for the pea sized aftermarket horn I fitted for the inaugural MoT , so the mont hole will need opening up if I get the proper one working.
Not sure if u-sonic will help at this point as it's so greasy on the outside -
In days of old, petrol was the best cleaner !
Clem2112:
Ultrasonic worked a treat after the horn was degreased with jizer.
It took 3 goes before the water stayed clear.
After draining , I dried it out on a radiator for an hour, connected it up and adjusted to get a decent noise.
It just needs some paint now, then the plastic cover can go on. :D
Liam:
Thought I'd up-date this thread. Just spent a couple of days trying to sort the original horn on my 750F... Last resort was boiling. Wish I tried this first off. Works like a treat now. I dried it out for twenty minutes in a fan oven at a low temp and sprayed everything with WD40 before reinstallation... boom!
Who'd a thought!
Navigation
[0] Message Index
[*] Previous page
Go to full version