SOHC.co.uk Forums > CB750

front disc removal, twin disc cb750 F2

(1/4) > >>

onethumb:
Hi all, I'm in the process of a complete strip down so I can get all the bits that need doing powder coated, herein I've come across a bit of a pig. I've removed the one front disc but how do I get the speedo bit off the axle to remove the other disc?
I know I'm going to kick myself when I find out but for now I'm stumped and feeling a little stupid.

Thanks in advance

steve

hairygit:
Not done an F2, but if it's the same as the F1, then you'll find one end of the wheel spindle is a sleeve but. Remove that, the spindle is then free to be removed, freeing the disc and speedo drive.

Sent from my X5 using Tapatalk

UK Pete:
yep thats correct you have to remove the sleeved nut and slide out the spindle,and speedo drive
pete

onethumb:
Hi gents and thanks for such fast reply's, I thought that was what it was but the sleeve is like its welded in. I've tried oil, heat and a hammer but its not budged! Any ideas?

hairygit:
Silly question, but are you using a suitable size spanner or socket on the sleeve, with a bar through the hole in the other end of the spindle to stop it rotating? It's just I have this nightmare vision that you're trying to force it out without unscrewing it?

Navigation

[0] Message Index

[#] Next page