SOHC.co.uk Forums > CB750

phil read replica conversion

(1/2) > >>

whiteylfc:
just wondering what the reaction is going to be for ripping apart a perfectly good Phil Read Replica to look for better handling,brakes,etc.I was told that Yamaha FZR front and rear ends were an easy shoe into the CB750 F2 frame so I've bought a 1986 Genesis off ebay and began the big build.
I know I might be committing a mortal sin but at least its got my brain cells humming again.
First thing....the front end is way too wide for the Honda headstock
Second thing....the Yamaha swingarm is way too wide for the Honda frame......

Any advice would be gladly accepted.......

haynes66:
go for it! youre not changing anything that cant be changed back again at a later date. you can modify swingarms and headstocks if you have access to machining equipment or a good machinist. i've even seen a monoshock conversion on a Z1 where the top shock mount could be ground off again without affecting the standard frame at all. trawl the yank site for headstock and rear end swapping. they seem to be less concerned about originality over there. good luck!!  (BTW, i still have youre footpeg. i'll post it after christmas)
pete.

Chris400F:
Just my thoughts, and a difference of opinion from the previous post, but nothing wrong with that.
From a quick peruse of the web the info I have seen suggests that there were 150 built if which there are estimated to be 35 left.
If that is the case then apart from anything else the value of the bike lies in its rarity.
I would say don't mess with it, if you want to build a custom bike with modern parts then start with a less rare base bike.
Maybe get hold of a standard F2 and build a replica replica with the modern bits you want to use.
I'm sure suitable parts are available somewhere so you could still get the PRR look if that's what you want.

whiteylfc:
hi chris...I run the Phil Read Replica owners club and website and pretty much know where all the remaining genuine Reads are. Having put together 2 Reads and 2 Honda Britains,I fancied doing this Read different to the rest.It hadn't moved for 20 years and the wheels,brakes,chromework and clocks were shot.A guy in the owners club has successfully converted his Read with FZR parts and it looks mint.The rear swingarm is in,but I need to weld 2 lugs on for the bottom of the springs.The headstock is going to need machining down to take smaller roller bearings.I've not worked out whether the standard bars will fit or if I have to use adjustable clip ons.Once originality is out the window I can look at anything that improves its looks or performance.I'm taking it to the Classic TT in 2016 so I've plenty to do this winter.....

Chris400F:
Go for it then. As I said, just my thoughts, which were without knowing the state of the bike which sounds as if it is more
of a rebuild project than the 'perfectly good' of the original post.

Navigation

[0] Message Index

[#] Next page