750K front brake pad 'puck' - part number 45151300000

[philward]

Just re-furbing front caliper that I bought from DK and the brake pad 'puck' - part number 45151300000  is missing.
Is it required? I have one on my other K2 but unsure what K model this is off and if they where fitted to all models. The caliper came with pads so I assume the bike it came off was being used without it.
Phil

[Bryanj]

If you mean the hylon washer they regularly used to go missing and wernt used with pattern pads anyway

[philward]

The one on my K2 is steel - but if pattern pads don't use them, that's probably why its missing from the caliper I'm re-building - as long as its ok without, that ok with me!
Thanks Brian

[Bryanj]

Now the piston has a big steel blanking washer over the centre hole and then there was a nylon washer between that and the pad. I have fitted wing pistons(all i could get at the time) which have no steel washer and they worked OK

[AshimotoK0]

Now the piston has a big steel blanking washer over the centre hole and then there was a nylon washer between that and the pad. I have fitted wing pistons(all i could get at the time) which have no steel washer and they worked OK

Big insert on my 750K0 was also domed slightly too Bryan (convex)

[philward]

That's the same as the one on my K2 as well

Sent from my XT1032 using Tapatalk