« previous next »
Pages: [1]   Go Down

Author Topic: Hex pan head 6 x 28 screw  (Read 4694 times)

Offline Liam

  • SOHC Associate
  • Posts: 69
    • View Profile
Hex pan head 6 x 28 screw
« on: April 21, 2016, 06:03:49 PM »
Hi…  Trying to find replacement hex head screws in place of the OE cross head that fix the "stator comp" in place. 
Any ideas where I can purchase them from???
Cheers...
Logged

Offline JamesH

  • SOHC Jedi
  • Posts: 2880
    • View Profile
Re: Hex pan head 6 x 28 screw
« Reply #1 on: April 21, 2016, 06:40:32 PM »
Try CMSNL
Logged

Offline hairygit

  • SOHC Jedi
  • Posts: 2708
    • View Profile
Re: Hex pan head 6 x 28 screw
« Reply #2 on: April 21, 2016, 06:43:39 PM »
Try these, e-bay item    281739945751. He's a good reliable seller. He has a choice of many sizes, but m6x30 is your best bet, £1.10 for 10 delivered. If necessary you can easily grind or file 2mm off them if you are worried about clearance.
Logged
If it's got tits or wheels, it's hassle, if it's got both, RUN!!!

Offline Liam

  • SOHC Associate
  • Posts: 69
    • View Profile
Re: Hex pan head 6 x 28 screw
« Reply #3 on: April 21, 2016, 11:34:07 PM »
brill…  cheers gents
Logged

Offline Chris400F

  • SOHC Master
  • Posts: 1013
    • View Profile
Re: Hex pan head 6 x 28 screw
« Reply #4 on: April 22, 2016, 08:56:59 AM »
Quote from: hairygit on April 21, 2016, 06:43:39 PM
If necessary you can easily grind or file 2mm off them if you are worried about clearance.
Remember to put a nut on the threads before cutting - wind it off to clean up the thread ends.
Logged
Pages: [1]   Go Up
« previous next »