Try our new info resource - "Aladdin's Cave" (Main menu)Just added a separate link to Ash's Dropbox thread (shortcut)
Quote from: Laverdaroo on September 04, 2022, 11:39:51 PMThese are quite good, about 12 quid off flea bay. Start at 5mm and go to 11 surprisingly. They’re dead thin and really handy for those sorts of jobs. Starter motor nuts etc….Sent from my iPhone using Tapatalkfound these https://www.ebay.co.uk/itm/193263715652?epid=172611339&hash=item2cff6a4544:g:LHMAAOSwSlBYuutX&amdata=enc%3AAQAHAAAAoPOJjELp4nvD44CRV2W1H9jiaP8%2BSvpbMKfvh%2F1RX31DqDvZyoVRylgF511uDGK%2BsfFxh6DA9d0jMsKuXfh1QrRRP0%2FKMHXwczGRGI0SSXjvPhQGO6FfjkCwdz1h44NtJTf2rbOzeJAEkt5kUw6in%2B%2BcDCMHU4z0GzUGml0e0aG5JYVSFKiC4a0G3RwztrGB2DzDYe1QHJlq3DnsesbT86k%3D%7Ctkp%3ABk9SR_jd-r3hYA
These are quite good, about 12 quid off flea bay. Start at 5mm and go to 11 surprisingly. They’re dead thin and really handy for those sorts of jobs. Starter motor nuts etc….Sent from my iPhone using Tapatalk
That looks well Sy
I was talking to Mark Paris on his Hondaman system and where to mount it. I asked him if I could open the case so I could attach a bracket but he said that the countersunk screws can be removed and replaced with different ones if you need to do that. Given all that I either intend to mount mine below the battery case or behind it Simon, just an idea as even though you can't see it, it would look tidier and more secure that way.
The location of mine has proved excellent. No heat, no vibrations thanks to the six damping rubbers in the battery cage. It's still the same 46 year old rubber strap. Mine is just a little bit canted due to the screws that fasten the power transistors, which helps to secure its position. It's impossible for the box to slide down. BTW, you'd be surprised how much space there is behind that RH side panel. I could have chosen a much bigger box.