Try our new info resource - "Aladdin's Cave" (Main menu)Just added a separate link to Ash's Dropbox thread (shortcut)
Something lurking in my adled brain tells me that the carbs are "handed" so if you have a total box of bits(still got the 400 ones to do comfy, need felts) and you mix the slides up it is possible to get them in wrong. I may well be wrong on that myself, would be glad for confirmation
Is the emulsion tube where the needle jet fits and slides up and down fitted the right way up ? It should protrude into the Venturi a small way,looking like a small ‘cup’ if fitted upside down it will not be seen.
I would be surprised if the sliders are wrongly fitted as this would also cause problems on the top levered plungers unless they have been removed & put on back to front as well.It will be interesting to see what you find.
Quote from: Cappodimonte on September 19, 2022, 02:58:17 PMIs the emulsion tube where the needle jet fits and slides up and down fitted the right way up ? It should protrude into the Venturi a small way,looking like a small ‘cup’ if fitted upside down it will not be seen.I will find out tomorrow when I take the carbs off the bike and I will have 4 boxes set aside for each individual carb should I deem it necessary to swap those slides.