This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Topics - Davelu88
1
« on: September 29, 2023, 03:16:39 AM »
Hi all , I have a 1974 CB 450 project for sale ,its all apart in boxes but includes frame , engine , and everything else apart from , exhausts , top yoke , seat, rear wheel , although I have a 16 inch wide rim rear wheel and tyre that fits . I have the V5 for it . £400 for the lot . Collection only from North Yorkshire. Regards Dave.
2
« on: August 21, 2023, 10:58:54 AM »
I have 2 CB 450s that I am registering, one didn't have a title so I got a dating certificate whereas the other had the title etc .I sent of 2 lots of applications and last week had an inspection for the non titled bike which I expected & today I get another email saying the one with the title needs an inspection as well. What is the point of having a title if the DVLA ignore what its for . Rant over
3
« on: July 22, 2023, 03:16:09 PM »
Hi all , i have registered a few bikes all with a dating cert but i have a CB 450 to reg & i have the US title with it ,am i correct in thinking i do not need a dating cert now . Thanks
4
« on: July 18, 2023, 12:13:52 PM »
Another pic
5
« on: July 18, 2023, 12:07:19 PM »
Hi Selling my 75 plate 550F was an import but UK reg now , loads done last year frame & swingarm powder coated , new bronze bushes , new headstock bearings & races , seat , indicators , handle bars , ignition , paint , left side switch gear , plus lots more i have forgot . Has a normal wheel on the rear now and not the wide rim as in the pics i do have some of the other bits that came off it , grab rail fender stays , rear light , it does have a Kerker exhaust which is great & i believe quite expensive . had some new seals in carbs and i put them through the ultrasonic cleaner , tank is mint inside. message if anyone got any questions. £2750
Dave
6
« on: June 30, 2023, 03:33:17 PM »
Anyone know how long a dating certificate from VJMC is taking nowadays 🤔
7
« on: May 15, 2023, 05:08:25 PM »
Hi all , my 550 F is stalling and lurching forward when put in gear , I have tried to adjust at both ends and turned the adjuster screw till it gets resistance but to no avail . The clutch arm is moving freely and I made sure the little notches lined up , could the plates be stuck as not ridden for a bit while refurb took place . Any help appreciated 🙏
8
« on: April 24, 2023, 04:56:08 PM »
Hi all, the bike I am building is a 550f & wish to delete the clocks , ignition etc for a single clock up top , I also wish to delete the 550f ignition and replace with a 550 k one on the side . The ignition DS sells only has 4 wires but my F has 5 pins , does anyone know what the difference is between the two . Cheers Dave
9
« on: March 22, 2023, 04:43:22 PM »
Hi all, looking for a decent complete rear wheel to replace the 16 inch one that is currently one one of my bikes as it looks odd. I am open to PX if that helps as I have a few bits eg: tank , side panels , grab rail , big rear light. .Cheers Dave
10
« on: March 21, 2023, 11:57:12 AM »
This is my mix of the 550 F & K mongrel with British racing green paint & a Delkevic exhaust, 
11
« on: February 27, 2023, 06:47:47 PM »
Hi all , when checking over my bike I tested the battery with my multi meter, the battery was 11.84v with the bike off . With it switched on it dropped to 11.45v and with it started and revving it rose to 11.49v . I put the battery on my other F1 and when revved it rose to nearly 12.8 v . Does anyone think I have a charging issue 🤔
12
« on: February 16, 2023, 08:38:02 PM »
Hi iam trying to restore a set of tank badges and although I have got all the old enamel off one of them is a bit marked etc . I painted with umbrol but it looked crap and uneven , has anyone come up with a decent way of painting the letters . Cheers
13
« on: February 15, 2023, 10:59:11 PM »
Hi all , does anyone know where I can get 1 inch short stems with a 14 ml thread and same for knurled end . I can't seem to find any . Cheers
14
« on: December 28, 2022, 08:38:39 PM »
Hi all , I am doing a 500/ 550 tank and am wondering if you can buy the tank decal including the black area as the only ones I have seen are the white lines and you have to paint the black area yourself. TIA
15
« on: December 07, 2022, 04:55:56 PM »
Hi All , could someone please measure their seat length from a 500/550 71 -76 model also anyone know if the hinges line up on a F model. Cheers Dave
|
Show Posts