Author Topic: Indicator fault  (Read 6409 times)

Offline davidrsmith

  • SOHC Member
  • Posts: 107
    • View Profile
Indicator fault
« on: September 28, 2016, 08:49:10 PM »
Hi

Now got the carbs fitted (thanks for the help) I have fitted the airbox and the battery. I have tried turning the electrics on for the first time, all seems ok except the indicators. Moving the switch to either left or right just gives me a loud screeching noise, the bulbs don't light and I can't hear the relay at all.

Anyone ever seen this, I haven't had a chance to fault find on it yet but I guess either the relay is shot or there is a short?

Dave

Offline Bryanj

  • Grogu
  • *
  • Posts: 12559
    • View Profile
Re: Indicator fault
« Reply #1 on: September 29, 2016, 06:20:28 AM »
The screech could be the relay if there is a short or could be the audible device depending on what bike

Offline davidrsmith

  • SOHC Member
  • Posts: 107
    • View Profile
Re: Indicator fault
« Reply #2 on: September 29, 2016, 06:33:43 AM »
Hi
The bike is a CB550k3 which was imported from the US. So it was built to their standards, on the circuit diagram in the haynes manual it does show a turn signal buzzer, but I haven't actually seen it (not that i've looked) on the bike.

Dave

Offline royhall

  • SOHC Jedi
  • Posts: 3454
  • Keep biking I'm not quite bankrupt yet
    • View Profile
Re: Indicator fault
« Reply #3 on: September 29, 2016, 07:27:15 AM »
May not be related, but it's good practice to run a separate earth cable to each of the indicators. Sounds like the flasher relay has gone, and take the opportunity to remove the awful buzzer.
Current bikes:
TriBsa CCM 350 Twin
Honda CB350F in Candy Bacchus Olive
Honda CB750F2 in Candy Apple Red
Yamaha MT07 (2026) in Black
Triumph T100C
Suzuki GS1000HC
Honda CB450K0 Black Bomber
Honda CB750K5 in Planet Blue Metallic

Offline mike the bike

  • SOHC Jedi
  • Posts: 2652
  • CB400F, Royal Enfield Interceptor.
    • View Profile
Re: Indicator fault
« Reply #4 on: September 29, 2016, 07:31:09 AM »
Agree 100% with the above advice.
Where's that 10mm socket got to?

Offline davidrsmith

  • SOHC Member
  • Posts: 107
    • View Profile
Re: Indicator fault
« Reply #5 on: September 29, 2016, 07:13:25 PM »
Thanks for the replies, where is this buzzer located on the CB550k3,  I must admit I haven't noticed it?

Offline davidrsmith

  • SOHC Member
  • Posts: 107
    • View Profile
Re: Indicator fault
« Reply #6 on: September 29, 2016, 08:43:34 PM »
Fixed, it was the buzzer, as soon as I removed it the indicators started working.

Thanks for the advice.

Offline Rob.b (Rob Birkett - RIP)

  • SOHC Associate
  • Posts: 86
    • View Profile
Re: Indicator fault
« Reply #7 on: September 29, 2016, 08:59:32 PM »
LMAO, must only be me that likes that buzzer. I still have it fitted to one of my 500s.

Ha ! No you are not alone, I've put one on my CB500 I would not be without it.

Rob.

Offline Bryanj

  • Grogu
  • *
  • Posts: 12559
    • View Profile
Re: Indicator fault
« Reply #8 on: September 30, 2016, 07:00:53 AM »
But honda asked the dealers to remove them as they sounded too much like crossing beepers to the blind!!

Offline D C 500

  • Newbie
  • Posts: 6
    • View Profile
Re: Indicator fault
« Reply #9 on: October 02, 2016, 10:43:33 AM »
LMAO, must only be me that likes that buzzer. I still have it fitted to one of my 500s.

Ha ! No you are not alone, I've put one on my CB500 I would not be without it.

Rob.
Same here, sounds like a dust cart reversing when applying the indicators. with my memory i need it.

Offline Ashdowner

  • SOHC Expert
  • Posts: 260
    • View Profile
Re: Indicator fault
« Reply #10 on: October 08, 2016, 02:21:09 PM »
My CB550K3 came with the original buzzer removed so I put an aftermarket one on which isn't too obtrusive. I also changed the indicators to led's and got an led relay at (total cost £10) and that was one of the steps which solved my charging problems (the others being a Phillips Eco H4 bulb and an led stop/tail)
CB550K3, CB550K1, Yamaha Midnight Star, and CA77 in 2473 pieces (at the last count)

Offline Moorey

  • SOHC Master
  • Posts: 1677
    • View Profile
Re: Indicator fault
« Reply #11 on: October 09, 2016, 09:47:26 PM »
+1 for the buzzer mine sounds like a strangled cat. I wouldn't be without it :D