SOHC.co.uk Forums > Project Board

K1 full restoration begins

<< < (6/15) > >>

Bryanj:
Where the pinch bolt goes through the top yoke to clamp the fork tube there is supposed to be a washer with a flat edge so it looks like a D. This is supposed to stop you tightening the bolt too much and breaking the yoke.
I think they have been discontinued by honda but somebody on here was making them

WestYorkshireBiker:

--- Quote from: Bryanj on July 14, 2020, 08:55:28 PM ---Where the pinch bolt goes through the top yoke to clamp the fork tube there is supposed to be a washer with a flat edge so it looks like a D. This is supposed to stop you tightening the bolt too much and breaking the yoke.
I think they have been discontinued by honda but somebody on here was making them

--- End quote ---
Brilliant. Thanks Bryanj.

Sent from my ONEPLUS A6013 using Tapatalk

Andrew-S:

--- Quote from: WestYorkshireBiker on July 14, 2020, 08:42:18 PM ---
--- Quote from: Bryanj on July 14, 2020, 08:37:42 PM ---Bet the "D" washer is missing

--- End quote ---
Not sure what that is but thanks. I'll add this to the shopping list. Along with new tank, wire harness (possibly), clock faces... etc etc. Sent from my ONEPLUS A6013 using Tapatalk

--- End quote ---

These little chaps, ignore the brake adjuster screw 'n' spring......


WestYorkshireBiker:

--- Quote from: Andrew-S on July 14, 2020, 09:05:22 PM ---
--- Quote from: WestYorkshireBiker on July 14, 2020, 08:42:18 PM ---
--- Quote from: Bryanj on July 14, 2020, 08:37:42 PM ---Bet the "D" washer is missing

--- End quote ---
Not sure what that is but thanks. I'll add this to the shopping list. Along with new tank, wire harness (possibly), clock faces... etc etc. Sent from my ONEPLUS A6013 using Tapatalk

--- End quote ---

These little chaps, ignore the brake adjuster screw 'n' spring......

--- End quote ---
Ahh. Thanks. Checked and there is a washer there (gap is about 2mm). I'll mic it when I get it off as another post mentions the correct thickness. Anyway cheers for the info!

Sent from my ONEPLUS A6013 using Tapatalk

AshimotoK0:

Note: Drawn by Ashimoto , Checked S.B. Devotion  ;D

[ Guests cannot view attachments ]

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version