SOHC.co.uk Forums > CB750
What would you do…..?
Nurse Julie:
Your UK K2 would of had 300 type forks fitted.
Unicorn top yoke As, all UK K2's has unicorn's
Switch gear as per picture
And square pattern seat
[ Guests cannot view attachments ]
[ Guests cannot view attachments ]
[ Guests cannot view attachments ]
[ Guests cannot view attachments ]
Bryanj:
I recognise that flooring
Nurse Julie:
--- Quote from: Bryanj on November 30, 2021, 09:05:45 AM ---I recognise that flooring
--- End quote ---
😂 😂 😂 😂 It looks like it needs a bloody good srub as well Bryan but it's not too bad for a workshop.
Lobo:
Wow, all present & correct on the stipulations Julie…
My throttle has the ‘Cruise control’ friction screw on the underside too; don’t seem to remember it having it when I bought the bike, but there was the threaded hole ‘ready & waiting’. So, I found the correct part and presto, I can set a rpm for balancing etc.
Also I don’t have the P(ark) notation, but rather just a dot.
It looks like you’ve deleted that crap UK requirement switch on the LH side, basically powering the headlamp ON (as I recall) to avoid going from HI straight to OFF position.
Interestingly your kill button is set at 90 degs to mine… !
Nurse Julie:
Your switch is a later one from a 400/4 or 550F.
The original UK K2 switch is part number 35300-300-730. Also fitted to the UK CB500 Four K1.
[ Guests cannot view attachments ]
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version