SOHC.co.uk Forums > CB500/550

CB500 upper front brake hose routing

<< < (3/4) > >>

SPR:

--- Quote from: Bryanj on September 17, 2022, 03:44:55 PM ---That hose is way too long, i think i have enough of the stainless hose left to make one up for you, price depends on length

--- End quote ---

Bryan

I'll have to try and find a difinitive length - does your stainless have a cover over it to look OE ?

Also the PDI doc seems to suggest the route is through the oblong hole behind the clocks ? or is it routed correctly and just over length - if the latter I may be able to get a measurement near enough using Ted's findings

Simon

Oddjob:
It's supposed to go between the clocks and in the hole in the clocks bracket.

McCabe-Thiele (Ted):
Don't rely on my measurement Simon as I used a steel rule.
Somewhere the correct length for the correct bars will be known.
My bars are I think from a 550.

SPR:

--- Quote from: Oddjob on September 17, 2022, 08:37:43 PM ---It's supposed to go between the clocks and in the hole in the clocks bracket.

--- End quote ---

I thought so - thanks

McCabe-Thiele (Ted):
Might be the change of route will loose some of the excess hose - worth a try just cost a  bit of brake fluid.

Navigation

[0] Message Index

[#] Next page

[*] Previous page