SOHC.co.uk Forums > CB500/550
CB500 upper front brake hose routing
McCabe-Thiele (Ted):
Sounds like my clutch cable route is positioned as it should be.. The throttle cables are pattern ones already on the bike. The guide clip under the tank is absent so they do not loop down enough I suspect.
Oddjob:
The switch wiring on a 500 is supposed to run through the bars and be none visible Ted. Have the bars got the slots on the underside to accommodate this?
McCabe-Thiele (Ted):
--- Quote from: Oddjob on September 17, 2022, 01:11:23 PM ---The switch wiring on a 500 is supposed to run through the bars and be none visible Ted. Have the bars got the slots on the underside to accommodate this?
--- End quote ---
Nah no slots - not sure what bars Bryan fitted it with tbh.
Bryanj:
The first ones that came out of the box to be honest, the switches had already had cut outs done for wires outside bars before i got them but as they worked they got used im afraid
Bryanj:
That hose is way too long, i think i have enough of the stainless hose left to make one up for you, price depends on length
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version