SOHC.co.uk Forums > Project Board

Honda CB400NA Superdream - new money puddle.

<< < (3/60) > >>

McCabe-Thiele (Ted):
Just back from Stafford Show, it was dry but there were lots of empty stalls inside with a lower attendance it seemed. We did not find a Honda stand or see a 400N with just one 250 Superdream.

Ran the engine when I got back, the oil looks as though it's leaking mainly  from the very  top  cover, oil then runs along the top fins on the cylinder head down the valley between the two cylinders. It made me wonder if the vent pipe is trapped.

I can see that the invoices included fitting two Time Serts as they do not use long studs but very long head bolts that reach through the head & block screwing into the upper engine case.

Bryanj:
That rocker gasket can be a pig Ted as its a T shaped cross section and needs glueing into the cover(evostick)

McCabe-Thiele (Ted):
You have endorsed what Ken told me this afternoon.
Ken was saying it's easy to knock the gasket out of position as you fit the cover.

As a bonus the oil ends up dripping onto the collector box so you get free smoke as well.

Bryanj:
At least it stopsthe collector rotting!

McCabe-Thiele (Ted):
The genuine seal at DS is £19.70, aftermarket part £9.00 is the cheaper option as good?

The top seal/washers are £7.70 each, so it's a total of £35.10 or £24.40 - just to cheer me up there might be a second leak lower down!

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version