SOHC.co.uk Forums > Project Board

Honda CB400NA Superdream - new money puddle.

<< < (56/60) > >>

McCabe-Thiele (Ted):
Hi Phil, I've used ebay & Amazon, only time I have had the wheels fall to bits is when I've accidenally moved the speed control or applied too much pressure.
I find position 3 on my Von Haus tool is usually about right, I tend to use two wheels at a time. IIRC I found a seller that sells the colours individually. Checking back today that seller has ended the listing.

I tend to use 400, 600 & 1000 most of the time.

Ken might know a supplier of quality versions.

Update I'm assuming you have them mounted the right way round on the shaft.

Oddjob:
If your finding them just exploding into pieces Phil make sure they are fitted correctly, The fronds are directional, get them the wrong way and they'll just break apart within seconds.

I use Amazon. https://www.amazon.co.uk/FyMosem-Mandrels-Polishing-Assortment-Deburring/dp/B0FBLXQPJ3/ref=sr_1_1_sspa?crid=6XH9A4BI8POJ&dib=eyJ2IjoiMSJ9.AhEs587IPxbFqnN82sPAbH79TE71NM0ehXySlDCBdq9YTXI6eArjAiyYfW91c_3ZVPBYFNCyrR_PXp-pc1KjTJqOoU8yN-eB8ktw3D4pqaw1bOfcFmAp-F4hbfhQnJrXnp9U1tZN8nscoHC0ubpySE3Hvcafiy2CfrNlNQdS53skQfVy108NSchg-sgbLdfwbqx2oXliPM4w8UOwhkUHHEC5dlMLOQRhS80-u6zVVhGjHTfJnGTOm7BxLU2Ufc43DOK3GMgXlnDWPv5ikdHRilPaQEk0ovvKvfSA4kZvbWU.SejaPOj_7_n06X6SaSZxKdffm6fTqOfMOwNZJW5S8r8&dib_tag=se&keywords=radial+bristle+disc&qid=1780683649&s=industrial&sprefix=radial+bristle+disc%2Cindustrial%2C105&sr=1-1-spons&aref=wx6vXWL9G8&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1

2 on each mandrel.

Oddjob:
Can I just add. Ted, lovely job. If you want it even better the only thing I'd suggest is to redo the really small areas near the screw holes. You can see they are slightly rougher than the rest. It may polish out nicely but the smoother you get those areas the better the end result is.

I'd also strongly suggest getting the extension lead for the Dremel. I use the Dremel 4300 IIRC. It has a metre long extension lead which is much lighter then the main tool so lets you use it longer and being thinner it also allows you to get into areas the main tool struggles with. Seriously, once you've used one you'll never go back to using the main tool. I used to have loads of them spares but ended up giving them away, everytime I send a dremel back under warranty they'd send the entire kit again with another extension. If I can find one you can have one foc.

Dremel 4250 is the replacement for the Dremel 4300.

https://www.amazon.co.uk/Dremel-4250-Attachments-Accessories-5-000-35-000/dp/B0949DP1J8/ref=sxin_12_sbv_search_btf_mod_primary_new?aref=913wQJZIhQ&content-id=amzn1.sym.0cf85714-a5b0-4d96-9050-d0dce9037023%3Aamzn1.sym.0cf85714-a5b0-4d96-9050-d0dce9037023&crid=ZW3NT56YZ4RB&cv_ct_cx=dremel%2B4250&keywords=dremel%2B4250&pd_rd_i=B0949DP1J8&pd_rd_r=c6aebd69-0c92-49a8-8bc6-229916ab9493&pd_rd_w=dOu9R&pd_rd_wg=evhUe&pf_rd_p=0cf85714-a5b0-4d96-9050-d0dce9037023&pf_rd_r=TMZ9MBBP8QDQ55R5JEX3&qid=1780684122&sbo=RZvfv%2F%2FHxDF%2BO5021pAnSA%3D%3D&sprefix=dremel%2B4250%2Caps%2C131&sr=1-1-9131241a-a358-4619-a7b8-0f5a65d91d81&th=1

And the extension is called a flexi shaft.

https://www.amazon.co.uk/Dremel-Multi-Purpose-Extension-Sharpening-Woodworking/dp/B008ETGPOY/ref=sr_1_18?crid=ZW3NT56YZ4RB&dib=eyJ2IjoiMSJ9.wc_7qGE_7sQ1KpllTMo_VEb9_DUCsi5VzDhF3KFf5dgI9aXSavcI0ubtJ9S18d5aDvIT5DFTWQgAQnjWPBXqMsuzS8TjXxCQB1nnqcLCP-69mfPmAAMUqyBwKR-NRkYRkHFWzO-Dmj4rnhinXc2ox4B8kIooT43CTsUTw9f43Mr2vSnRjCRsgMTPaME8eUb2YUVFxi2Iz1fkBRIOGW4Dk3OFNh8EIoY0Q7cxL-6_n5wbXFHjoAbAmIU2fkvlgoAiTbcUDSM3Ojl2m-767VUhDGyU7o70Pbfw8D4I5iLXojA.w8_PdqDr56PFL8gaky6aJUYug0eE7Gc5VVBmAwuTL20&dib_tag=se&keywords=dremel+4250&qid=1780684223&sprefix=dremel+4250%2Caps%2C131&sr=8-18&ufe=app_do%3Aamzn1.fos.7bbc1e72-d5e0-4378-81de-b15e5f172cd1

McCabe-Thiele (Ted):
It's a work in progress Ken, I'm far from finished!

I bought the Von Haus version (recommended by a member here) as I could not justify the price of a genuine Dremel kit. I don't think Von Haus do an extension lead.

Oddjob:
Evidently the flexi-shaft fits the Von Haus. From what I've read anyway. It's not as powerful as the 3250 and the rev range isn't as good but it's cheap. The problem is what happens if or when it burns out. The Dremel gets a 2 year warranty and I can say for a fact it's very very good. No questions asked. Plus as I said they tend to return the full kit if you've bought a full kit first off. So extra tools and flex for free.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version