SOHC.co.uk Forums > CB350/400
Something I can't find
Athame57:
--- Quote from: Skoti on March 13, 2025, 11:13:40 AM ---
According to Ken's post above you need 0.7 thread pitch.
The ebay one is 0.5 thread pitch so won't fit.
--- End quote ---
Talk about a senior moment, maybe I should'nt start before lunch. ::) Cancelled that order. Finally found what I wanted on Amazon which I don't like using.
Oddjob:
Should have just gone the Middleton route, he sells the nuts as well and his stuff is really good quality. There was a pic of my carbs just after I removed them after 40 odd years of rats pissing on them, the steel parts looked awful, the linkage rod was the worst anyone had ever seen, all the stainless stuff from Middletons fitted 40 years ago looked pristine and I refitted them after just a quick disinfecting and cleaning. Same for all my engine bolts, not a single one needed to be replaced.
Skoti:
--- Quote from: Oddjob on March 13, 2025, 01:41:53 PM ---Should have just gone the Middleton route, he sells the nuts as well and his stuff is really good quality. There was a pic of my carbs just after I removed them after 40 odd years of rats pissing on them, the steel parts looked awful, the linkage rod was the worst anyone had ever seen, all the stainless stuff from Middletons fitted 40 years ago looked pristine and I refitted them after just a quick disinfecting and cleaning. Same for all my engine bolts, not a single one needed to be replaced.
--- End quote ---
Aye,
top marks to Middleton's, I used to save up each month to buy fasteners for my Commando from Dave back in the seventies.
They still look OK today.
Athame57:
--- Quote from: Oddjob on March 13, 2025, 01:41:53 PM ---Should have just gone the Middleton route, he sells the nuts as well and his stuff is really good quality.
--- End quote ---
I surfed the Middleton site but couldn't manage to find the size I need. :(
Skoti:
--- Quote from: Athame57 on March 13, 2025, 04:10:00 PM ---
--- Quote from: Oddjob on March 13, 2025, 01:41:53 PM ---Should have just gone the Middleton route, he sells the nuts as well and his stuff is really good quality.
--- End quote ---
I surfed the Middleton site but couldn't manage to find the size I need. :(
--- End quote ---
There you go, cheese head M4x16 screw 19p and M4 nut to match 10p.
(link from Kens earlier post above)
https://www.stainlessmiddleton.co.uk/34296-cheese-slotted-machine-screws
Hope this is of help
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version